Mild steel pressure vessels internally lined with rubber/FRP provided with internal fittings and initial charge of cation and anion exchange resin
One set of regeneration equipment including hydraulic ejectors, acid & alkali tanks
One set of frontal pipe work & valves
One mild steel base frame for mounting cation & anion units
One conductivity meter to monitor treated water quality
Equipped with regeneration equipment & control panel
We at, aquashakti are engaged in fabrication, designing and developing a outstanding range of DM plant , which are highly suitable for any application that requires high output Reverse Osmosis equipment. Further, compact in design, these Desalination plants are based on a process of Reverse Osmosis Technology. Additionally, plant has necessary Pre Treatment systems, along with manual/automatic operation to control the functioning of the entire unit.
Our plants features:
Desalination is a separation process used to reduce the dissolved salt content of saline water to a usable level. All desalination processes involve three liquid streams: the saline feedwater (brackish water or seawater), low-salinity product water, and very saline concentrate (brine or reject water)./p>
The saline feedwater is drawn from oceanic or underground sources. It is separated by the desalination process into the two output streams: the low-salinity product water and very saline concentrate streams.
The use of desalination overcomes the paradox faced by many coastal communities, that of having access to a practically inexhaustible supply of saline water but having no way to use it. Although some substances dissolved in water, such as calcium carbonate, can be removed by chemical treatment, other common constituents, like sodium chloride, require more technically sophisticated methods, collectively known as desalination.
In the past, the difficulty and expense of removing various dissolved salts from water made saline waters an impractical source of potable water. However, starting in the 1950s, desalination began to appear to be economically practical for ordinary use, under certain circumstances.
The product water of the desalination process is generally water with less than 500 mg/1 dissolved solids, which is suitable for most domestic, industrial, and agricultural uses.
A by-product of desalination is brine. Brine is a concentrated salt solution (with more than 35 000 mg/1 dissolved solids) that must be disposed of, generally by discharge into deep saline aquifers or surface waters with a higher salt content. Brine can also be diluted with treated effluent and disposed of by spraying on golf courses and/or other open space areas.OA reverse osmosis system consists of four major components/processes: